Lighting LED PAR Lights ATA Case with 8 Compartments - ID Per Compartment 10 x 10 x 12 High
Lighting LED PAR Lights ATA Case with 8 Compartments - ID Per Compartment 10 x 10 x 12 High by Roadie Products, Inc. at Elisa Web. Hurry! Limited time offer. Offer valid only while supplies last. Please Note: It is absolutely essential that you physically measure your lighting equipment and check your dimensions against the inside dimensions
Please Note: It is absolutely essential that you physically measure your lighting equipment and check your dimensions against the inside dimensions listed here to avoid any errors. This lighting LED ATA case is constructed of 1/4 inch plywood with black nubtex laminate surrounded in aluminum extrusion and permanently machine split riveted together. It is then finished with steel flat corners, 4 spring loaded recessed catches and 2 spring loaded recessed handles with rubber grips for easy transporting. All hardware is plated for protection against erosion and weather. The interior of this case is completely poly foamed lined. The Corru- Cube dividers are made of single wall corrugated board sheets with 1/8 inch thick poly foam on one side. These sheets are then scored and formed into a 4 sided individual square compartments and taped together at the seam. These cubes are sized perfectly for the interior dimensions of your case. These dividers are not attached to the walls of the case but by placing these individual cubes into the case they hold each other firmly together. This is an effective way of dividing your lights with an economical light duty material. This case is a low cost alternative to expensive ATA cases and provides reliable protection for your lighting equipment.
Features & Highlights
- Outside Dimensions Approx 42 x 21 3/4 x 13 High - Cube Compartment Sizes 10 x 10 x 12 High
- 1/4 Inch ATA Medium Duty Plywood Construction - Black Nubtex Laminate Exterior
- Aluminum Bound and Riveted Extrusions - Steel Flat Corners
- 4 Spring Loaded Recessed Latches - 2 Spring Loaded Recessed Handles - Rust Resistant Hardware
- Poly Foamed Lined Interior - Light Duty Corru-Cube Dividers (See Description)
|Manufacturer:||Roadie Products, Inc.|
|Publisher:||Roadie Products, Inc.|
|Studio:||Roadie Products, Inc.|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Roadie Products, Inc., contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By JBL Bags
mpn: SRX815P-CVR-DLX, ean: 0716408538228,
Deluxe padded cover for SRX815P, water resistant 1000D black nylon exterior, 2.5mm polyethylene grille protector, 10mm padding, covered handle access with Velcro closure, with embroidered JBL logoThe ultimate protection for your SRX815P loudspeaker. ...
By JBL Bags
mpn: SRX818SP-CVR-DLX-WK4, ean: 0716408538259,
Deluxe padded cover for SRX818SP, water resistant 1000D black nylon exterior, 2.5mm polyethylene grille protector, 10mm padding, covered handle access with Velcro closure, with embroidered JBL logo *Designed for cabinets using JBL WK-4 caster kit, re...
mpn: G-SUB2225-24BAG, ean: 0716408508566,
Sub Woofer Nylon Bag c Built-In Casters, Fits Subs By Cerwin Vega, JBL, Mackie and Many MoreNylon exterior with built-in caster plate. 4 wheels, 2 fixed for control while transporting. Adjustable, removable nylon strap tow handle. 4 reinforced lift h...
mpn: BRLSPKLHW, ean: 0807822034660,
The Red Series BRLSPKLHW universal speaker trolley bag fits many of the larger 15" molded speakers on the market such as the JBL PRX615M and EV ELX115/115P. The durable black exterior made of ballistic nylon complements the soft polyester blend red p...
mpn: GPA-720, ean: 0716408501109,
Nylon-Covered Wood Powered Mixer Case; 13" X 13.5" X 20"Constructed of 1/2" plywood covered in 600-Denier ballistic nylon. Pull-out handle & wheels. Large accessory compartments. Tricot-lined interior. ...
By JBL Bags
sku: 581225001, mpn: EON18-SUB-18T, ean: 0716408522586,
The JBL Sub Transporter is a Patented System That Slips Over The Sub, Fully Encloses The Cabinet for Protection, & Rolls Using An Integrated Caster Board. Includes 4" Casters. Embroidered JBL Logo. Fits EON518S, JRX118S, JRX118SPThe perfect solution ...
By JBL Bags
mpn: SRX835P-CVR-DLX, ean: 0716408538235,
Deluxe padded cover for SRX835P, water resistant 1000D black nylon exterior, 2.5mm polyethylene grille protector, 10mm padding, covered handle access with Velcro closure, with embroidered JBL logoThe ultimate protection for your SRX835P loudspeaker. ...
mpn: GPA-777, ean: 0716408506890,
Speaker Bag w/ Reinforced Molded Bottom, In-Line Wheels, & Pull-Out Handle; Fits EV Sx100 & Many Others1680-Denier nylon exterior with roto molded polyethylene base. Retractable handle. Four (4) 100 pound test in-line wheels. Fits EON 15, Mackie SRM ...
mpn: 751863-0010, ean: 0750408388155,
Protect your F1 Flexible Array Loudspeaker with this highly durable protective bag....
mpn: k12 toteK1, ean: 0660845664043,
Protect your investment with these soft, padded totes made with weather resistant, heavy-duty Nylon/Cordura® material. Side-flap access to the aluminum top handle allows for vertical carry....